Guide for New Home Owner: How To Reset Simplisafe?

You may choose to leave the existing buyer with your SimpliSafe security system when you sell your home. You are now trying to figure out how to reset your security system.

We dug deep to provide you with accurate information on how to reset the system when you’re handing over the SimpliSafe to a new owner. Only SimpliSafe can reset the SimpliSafe Security system.

To make your SimpliSafe ready for the next owner, you must contact SimpliSafe and request that the base station be deactivated from your account and any current surveillance systems be cancelled.

When the old owners’ information has been removed, the new ones may be added to the SimpliSafe account. Keep in mind that your SimpliSafe Security System was designed to go wherever you go.

There are, however, a plethora of scenarios in which someone may leave it behind for the next owner. Read on to learn the procedure for handing over control of your alarm system to a new owner.

How to Reset SimpliSafe for a New Owner, and Turning on the SimpliSafe Home Security System.

Who Will Take Over SimpliSafe Now?

As a preliminary matter, please be aware that your SimpliSafe account will be immediately deactivated upon your request.

After the call is over, the device will stop monitoring the home. Submit this form only when you are ready to terminate your subscription and switch off the system, such as the day you move out.

Your SimpliSafe account may be terminated with little effort. These are the basic instructions:

Step 1

Before giving up management of your SimpliSafe equipment, you should cancel your membership to any monitoring services. Just get in touch with SimpliSafe’s support staff to obtain a refund.

Step 2

If you want to listen to anything that plays itself automatically, choose option 2. A service representative will connect you with them. To facilitate the transfer of ownership, please provide them with your Safe Word, phone number, and home address.

Step 3

After you give up on monitoring, the new owner may sign up for a SimpliSafe membership and begin setting up monthly monitoring systems.

If you need to contact customer service or create an account, you must do it online. The Base Station’s serial number, located on its underside, must then be provided.

It will be much easier to hand over management of your SimpliSafe equipment to the new homeowners if you did not install monitoring systems.

Simply said, there is no reason to call off the event. If this is the case, you may leave the device unattended for the buyer to add it to their new account.

A Guide to Resetting Your SimpliSafe Security PIN

When passing on a device to a new owner, it is crucial to ensure that any sensitive information is encrypted. Turn the smartphone over to the new owner after setting the passcode to [0000] or another simple number. Your home’s security system will only work with the correct PIN.

If you forget your PIN and can’t access your account, you may easily reset it using your keypad. To change a PIN, just follow the on-screen instructions by clicking the menu button, selecting PINs, and then selecting the new PIN.

If you have forgotten the PIN and need assistance, contact SimpliSafe.

An aluminium emblem reading “SimpliSafe “You’ll need the security word to reset your PIN over the phone. When handing over a device to an existing customer, it is essential that you take precautions to prevent any unauthorized access to sensitive information.

Turn the smartphone over to the new owner after setting the passcode to [0000] or another simple number.

Using a Password Management Service

For a small monthly cost, subscribers of SimpliSafe’s Interactive Monitoring Plan have access to an online account where they may change their PINs.

1.1 Modify your preferences by entering them. 1.2 Choose the PINs you want to use. 1.3 Choose the PIN you want to change and proceed as directed. If you are enrolled in any Standard Monitoring Plan, you may not alter your PIN online.

Using the Keypad to Modify a Password

Your pick of any valid four-digit number, except [1234]. You may change any of the PINs at any time using the keypad.

Step 2.1: Go to the Menu button. 2.2% Use the PIN links. It’s important to be specific about which PIN you’re changing. To proceed, enter your master PIN when requested. Enter the new PIN when asked.

The Varieties of Personal Identification Numbers

There are primarily three varieties of SimpliSafe PINs. These are separate from the Safe Word, so keep that in mind.

Whenever time you speak with a member of the SimpliSafe team, whether it’s to make changes to your monitoring services or to confirm or cancel an alarming incident, you’ll need to have your Safe Word ready.

Identification Number Identifier (IDN)

New SimpliSafe keypads have a [1234] PIN code by default. During the process of configuring the new keypad, a master PIN selection option should be made available.

Only the master PIN may be used to make changes to the keypad’s configuration. A single master PIN is needed to access the keypad settings and power the system on and off for every SimpliSafe system.

ID Numbers that Last a Lifetime

A Duress PIN may be set up or changed using the keypad or an Interactive Monitoring account on the website. What happens if someone enters your PIN without your knowledge or consent?

It will notify the emergency response Centre that help is required, and officers will be sent quickly.

The gadget will no longer send out alerts to the emergency response team or the police. An assailant might be fooled into believing you are cooperating with their demands while help is on the way if you input this PIN.

User I.D. Numbers as An Identifier

An individual’s personal identification number (PIN) may be used for several purposes. Individual PINs may be issued to anybody residing at the residence, including roommates, landlords, children, and carers.

Individual user PINs are not used to configure the system. When you give each member of your household a unique PIN, no one else will be able to change the PIN or access your account information without your permission.

A user’s personal identification number (PIN) is the only way to turn the system on and off for them. With the SimpliSafe app on your smartphone, you can monitor who comes and goes from your home by seeing when your kids and other authorized people turn the security system on and off.

Like Mater PIN, SimpliSafe accounts may have up to four additional user PINs. A user PIN may be any four-digit sequence, except [1234], and can be entered using the account’s associated keypad.

When Setting Up New Monitoring Services, Use SimpliSafe

When a buyer is ready to activate the monitoring equipment, they must also choose a service package.

SimpliSafe offers two different subscription plans for monitoring your house, alerting you if it’s been broken into, and even calling the police if required.

These are the standard and interactive packages. You are not tied down to a plan and may cancel at any moment without incurring any fees. There is a promotional sign for SimpliSafe posted in front of a residence.

When creating an account for a new user, just go through these quick and easy steps.

Download the SimpliSafe app or visit SimpliSafe.com/activate to activate your account. Make a brand-new account, or go ahead and type in that email address you always use to place orders with us.

If you’re using a web browser, you may follow these instructions to set up a new device. If you’re using the app, tap the “Activate Monitoring” button and follow the rest of the prompts.

Subscriptions may be paid for every month with a credit card, and the serial number of the Base Station is needed to set up the device.

Is a wireless connection necessary for SimpliSafe to function?

In the case of a power outage, the SimpliSafe Base Station can operate for up to 24 hours on its internal rechargeable battery.

If the blackout lasts more than 24 hours, you may replace the rechargeable batteries in the base station with a different set.

To keep the base station in working order, regular disposable batteries should not be placed inside. You may use SimpliSafe without Wi-Fi if you subscribe to a monthly monitoring plan that includes cellular coverage.

The wireless security system’s ability to accommodate cameras is critical. If you’re in an area with spotty mobile phone reception, you’ll need this, too.

Basic Equipment Needed for SimpliSafe Home Security

• A yard sign advertising SimpliSafe
• Each SimpliSafe basic security package comes with a base station, an entrance sensor, a motion detector, and a keypad.
• If none of these four components is present, your system won’t be able to detect intruders. One who takes safety seriously must develop this thought further.
• SimpliSafe’s 6-Piece Wireless Security Basics
• SimpliSafe
• The SimpliSafe keypad may be placed anywhere without disturbing the wall’s wiring. All signs point to that spot, so please install it there.

Conclusion

By activating the SimpliSafe system, we may feel more secure in our house. You may provide another individual access to your SimpliSafe equipment.

If you choose to sell your SimpliSafe, it would be. You must notify SimpliSafe if you want to have the base station removed from your account or if you no longer wish to use any active surveillance equipment.

Because it has been removed from your account, the new buyer may contact SimpliSafe to set up additional security system devices.